Square’s EMV Nick Card Readers Unboxing and Review


Square-chip-card-emv-reader-unboxing-review

Square brought the way in which for that mobile processing boom, so it’s no shocker the company was the first to promote having a headphone jack nick card readers in front of the October 2015 nation-wide shift to nick cards. Some other mobile processors are biding time and telling customers that the nick card option would be “in the whole shebang,Inches Square debuted its nick card readers design late in 2014 and started accepting pre-orders around the same time frame.

Allow me to be obvious: All mobile payments apps that process transactions as card-present will possess a nick card readers by October, otherwise they’ll likely get free from the game (like Leaf POS). However with its excellent group of engineers and sizable jump, Square certainly has an advantage within the race and, come October, its readers will most likely function as the most tested and therefore probably the most reliable.

We ought to observe that other mobile processors that do not depend on swiping cards might not be effected through the nick card transition, since their transactions are technically processed as card-not-present. If this sounds like the situation, providers like Flint Mobile – which utilizes your phone’s camera to scan the credit card with no additional hardware – might find themselves better off since users won’t have to incur any extra hardware cost or hiccups.

But camera checking apps aside, Square is poised to achieve the best headphone jack EMV-compliant mobile nick card readers available on the market this summer time as business proprietors start to bother with the nick takeover.

My knowledge about Square’s nick card readers was entirely positive. It showed up with beautiful packaging and sufficient instructions, and labored flawlessly during a number of tests. I scanned dozens of transactions with no single error. It loads rapidly, reads rapidly, and works just as described. It’s small, simple to use, and doesn’t need a Bluetooth link. This is actually the first headphone jack nick card readers I’ve used, but it’s difficult to imagine a lot of enhancements came from here.

But here’s one pretty significant disadvantage for that Square nick card readers: No Uncover Card nick compatibility! Although this feature should launch eventually (hopefully by October), for the time being you’ll need to swipe all Uncover transactions.

Browse the full review and unboxing pictures below. Should you be undecided about upgrading your Square readers, I really hope this puts the mind comfortable. It’s not necessary to hurry, but because we obtain nearer to October you’ll likely see longer shipping delays because of elevated demand. So certainly order by September. Otherwise, it never hurts to become accustomed to the brand new hardware meanwhile. You’re likely already seeing nick cards out of your customers. Adding the additional layer of security can help you to protect against chargebacks and funding holds before the October 15th switch.

You can observe our in-depth Square Register review here, and out mobile processing comparison chart here if you are interested. Happy selling!

Table of Contents

Packaging:

Only nine days once i placed my order, the readers showed up via United states postal service. It shipped after four days. Square states it will require between two and three days to obtain the readers – and this can be true as demand increases – until then they appear to crank the orders out. I ought to observe that while my order mentioned which i may need to sign for that package, no signature was really needed. The readers was delivered within my mailbox using the regular mail.

What’s within the Box?

  • Nick card/magnetic stripe card readers
  • USB charging cord (USB to Micro USB)
  • Instructions (British and Spanish)
  • Emblem sticker (Square, Visa, MasterCard, American Express, Uncover)

Square’s Nick Card Readers Specs:

  • Cost: $29 ($31.32 with tax, free delivery)
  • Weight: 20 grams (under an oz)
  • Dimensions: 1.31″ H (2″ if including jack)  x 1.31″ W x  .56″ D
  • Time for you to arrive: 9 days from order date
  • Time for you to charge very first time: twenty minutes
  • Time for you to scan card: Under 1 second
  • Time for you to connect: two to three seconds (each time application is opened up)
  • How lengthy will a charge last? A lengthy time. Multiple times of heavy use.

So far as battery existence, observe that the very first time I made use of it battery appeared to empty more rapidly, possibly because of the initial firmware update. After that it appeared to carry up very well. Reconnecting over and over appears to become a bigger drain around the battery than running transactions.

The next images compare the brand new readers towards the old model. Clearly the older model may be the smaller sized one around the left.

Connecting towards the Device:

Every time you open the application, even though you haven’t removed the readers, the program will require a matter of seconds to acknowledge and fasten towards the hardware. This never required greater than three seconds, even if your readers is taken away and reinserted. I did not experience any glitches or slow starts.

Not Only for Nick Cards:

This readers really has two slots: someone to insert nick cards, and the other to swipe magnetic stripe cards. Even if your nick card shift is available in October, you will probably still visit a fair quantity of mag stripe cards in circulation, so it’s vital that you support them in to the near future to prevent lost sales. Fortunately you won’t be required to take with you two separate readers! The swipe slot will act as it has, and it is easily differentiated in the nick slot since the nick readers includes a barrier that stops swiping in addition to three visible metal connectors that browse the nick circuit. These connection points also actually firmly contain the nick card in position throughout the transaction.

Nick and Signature, Not PIN:

If you’ve seen European mobile nick card readers, you know the way bulky and inconvenient nick and PIN card readers could be. Since these readers need a dedicated PIN pad (i.e., the PIN can’t be joined around the devices touchscreen), these visitors completely outside of the telephone and communicate via Bluetooth. Which means you need to take with you and keep an eye on two devices, each of which may need substantial charging.

The Square nick card readers does require charging, but each charge lasts quite some time. And also, since it connects to the headphone jack, it will not consume your device’s battery by utilizing Bluetooth.

In america, we’re mainly likely to see nick and signature charge cards. Prepaid credit cards don’t require a PIN, only a signature. For transactions under $25, you may still turn the signature prompt off just like previous versions. If (or when) the united states switches to nick and PIN, we’ll visit a new wave of hardware. On the other hand there isn’t any need to take with you a bulky secondary device.

Troubleshooting:

Here are a few things common items you might encounter when first by using this readers:

  1. Charge the readers just before use: By trying for doing things as they are without charging, it will not work. You should check the proportion of charge residing in Settings.
  2. Improve your application: If you work with a classic form of the application, the nick readers will not be recognized.
  3. Don’t insert the credit card too soon: You need to insert the credit card only when you are getting towards the screen that states Insert, Swipe or Enter Number.
  4. Don’t take away the card too soon: The credit card must stay in the readers before the transaction is finished. Don’t remove it throughout the tip screen. The client must sign using the card still within the slot! Yeah, this is often a little inconvenient, but it is also safer.
  5. Your system is not compatible: Square lists compatible devices here. I tested this with an apple iphone 4, 5, and 6 without any problems.
  6. Your situation is obstructing the bond: As the Square card readers is really among the finest designed readers when it comes to situation compatibility, certain cases are simply too bulky. Used to do test drive it by having an Otterbox Defender (a fairly bulky situation) and also got it using a little finagling. (The readers must be verticle with respect to utilize that situation.)
  7. Browse the instructions: Should you browse the instructions just before use, you likely won’t have problems!

Whenever you connect your billed nick card readers the very first time, the Square Register application will initiate a firmware update. This takes only a couple of seconds.

Square Nick and Contactless Readers Review:

We’ve preordered the brand new nick and contactless readers from Square ($50), coming fall 2015. This allows companies to simply accept NFC payments alongside EMV-compliant nick card transactions. Consider an evaluation with that hardware soon! There’s additionally a Square EMV readers made particularly because of its Square Stand hardware. That readers is wireless and works via Bluetooth.

For now, certainly think about this nick card readers. It’s pretty affordable so far as mobile nick card readers go, although countertop EMV-compliant charge card machines are less costly than you may imagine. Helcim sells them just for $199, including an integrated receipt printer and PIN pad. Considering just how much a standalone printer or PIN pad would cost, it’s a very solid deal. But when it comes to mobile – Square’s readers is actually reasonable.

Since you’ve read our Square nick card readers review, you might like to take a look at our in-depth overview of the Square application and repair, and check out our mobile processing comparison chart too!

Have you ever used Square’s nick card readers? Have you ever used a mobile nick card readers from another brand? Tell us your ideas and encounters within the comments.

“”